Graphite-Plugged Thrust Washers
Graphite-plugged copper-alloy thrust washers for axial sliding loads. Explore mounting holes, material selection, installation and drawing requirements.
View Details : Graphite-Plugged Thrust WashersSTANDARD & CUSTOM BUSHINGS
Plain Bearings. Built for Your Application.
Graphite-plugged bushings and composite bearings. Standard sizes from stock. Custom production to your drawings.
- Standard sizes from stock
- Custom to your drawing
- Material & tolerance review
OUR PRODUCTS
Find the Right Bushing.
Explore our plain bearing range.
Standard sizes and custom production.
SF-1 PTFE Composite Bushings & Thrust Washers
SF-1 PTFE composite sleeves, flanged bushings and thrust washers. Review three-layer construction, finishes, shaft and housing fits, lubrication and drawing requirements.
View Details : SF-1 PTFE Composite Bushings & Thrust Washers
Plain Bronze & Copper-Alloy Bushings
Solid bronze and copper-alloy sleeve bushings. Review material grades, lubrication, dimensions, installed fits and custom drawing requirements.
View Details : Plain Bronze & Copper-Alloy Bushings
Flanged Steel-Housed Copper-Alloy Linear Bearings
Flanged linear bearings with a steel outer housing and graphite-plugged copper-alloy inner sleeve for guided sliding motion.
View Details : Flanged Steel-Housed Copper-Alloy Linear Bearings
Straight Steel-Housed Copper-Alloy Linear Bearings
Cylindrical linear bearings with a steel outer housing and graphite-plugged copper-alloy inner sleeve for guided sliding motion.
View Details : Straight Steel-Housed Copper-Alloy Linear Bearings
LM / LM-OP Open-Type Graphite-Plugged Linear Bushings
Open-type LM-OP graphite-plugged copper-alloy linear bushings for supported shafts; the supplied photo also shows the closed LM version for comparison.
View Details : LM / LM-OP Open-Type Graphite-Plugged Linear Bushings
Flanged Plain Bronze & Copper-Alloy Bushings
Plain bronze and brass sleeve bushings with an integral round flange. Review alloy, sleeve and flange dimensions, lubrication and installed fits.
View Details : Flanged Plain Bronze & Copper-Alloy Bushings
Square-Flange Graphite-Plugged Bushings
Graphite-plugged copper-alloy bushings with a square four-hole mounting flange. Review dimensions, mounting fits and operating conditions for custom production.
View Details : Square-Flange Graphite-Plugged Bushings
Round Mounting-Flange Plain Bronze Bushings
Plain bronze and brass sleeve bushings with a round mounting flange and fixing holes. Review bolt-circle dimensions, installed fits, lubrication and custom drawings.
View Details : Round Mounting-Flange Plain Bronze BushingsShowing 64–72 of 88 products
CUSTOM SOLUTIONS
Made to Your Drawing.
Share your drawing, material, dimensions and quantity for a quotation.
Discuss Your ProjectMACHINING & MATERIALS
Core Machining Capabilities
Boniu machines custom copper-alloy bushings to customer drawings. Choose the alloy and standard before confirming dimensions and inspection requirements.
| Capability | Range / specification |
|---|---|
| Dimensional tolerance | Confirmed after review of the drawing, material, geometry and inspection requirements. |
| Machining size | No fixed size limit. Custom bore, outside diameter and length to drawing; final manufacturing feasibility confirmed during review. |
| High-tensile brass | CuZn25Al5Mn4Fe3; GB, US and EN reference grades listed separately below. |
| Other brass materials | H59 and H62 brass. |
| Tin bronze options | C93200, C90700, C93700 and C90500; specify the exact grade and casting standard with your drawing. |
| Quotation inputs | Drawing, units, alloy and standard, tolerances, quantity and operating conditions. |
Brass and Bronze Material Grades
Our four tin bronze options are C93200, C90700, C93700 and C90500. Regional grades below are comparison references, not a declaration of interchangeability.
| Material family | China / GB reference | US / UNS reference | Europe / EN reference | Relationship |
|---|---|---|---|---|
| High-tensile brass | ZCuZn25Al6Fe3Mn3 | C86300 | CuZn25Al5Mn4Fe3-C / CC762S | Related alloys; Al/Mn limits differ. |
| H59 brass | H59 / T28200 | C28000 | CuZn40 / CW509L | Reference only; Cu and impurity limits differ. |
| H62 brass | H62 / T27600 | C27400 | CuZn37 / CW508L | Reference only; Cu limits differ. |
| Tin bronze: C93200 | No exact GB match declared | C93200 | CuSn7Zn4Pb7-C / CC493K | Related leaded bronze; GB 5-5-5 is a separate alloy. |
| Tin bronze: C90700 | ZCuSn10P1 (comparison) | C90700 | CuSn11P-C / CC481K (comparison) | Phosphorus and tin limits differ; no automatic substitution. |
| Tin bronze: C93700 | ZCuPb10Sn10 | C93700 | CuSn10Pb10-C / CC495K | Related 10-10 alloys; impurity limits differ. |
| Tin bronze: C90500 | ZCuSn10Zn2 | C90500 | CuSn10-C / CC480K (comparison only) | No direct EN equivalent declared; CC480K has much less Zn. |
| Additional 5-5-5 reference | ZCuSn5Pb5Zn5 | C83600 | CuSn5Zn5Pb5-C / CC491K | Correct 5-5-5 reference family; not C93200. |
OUR FACTORY
From Your Drawing
to Your Application.
Bring us your application requirements. We will review the material, dimensions and tolerances with you before confirming supply.
Share your requirements
Send drawings, dimensions, material preferences and quantities.
Confirm the details
We review specifications, tolerances and availability before quoting.
Agree on supply
Confirm the quotation, lead time and inspection requirements.
ABOUT BONIU
A Supply Partner
for Your Bearing Needs.
Zhejiang Boniu Bearing Co., Ltd. supplies graphite-plugged bushings and metal-polymer composite bearings. We offer standard sizes from stock and custom production to customer drawings. Material specifications, available quantities and lead times are confirmed before quoting.
Tell Us What You NeedBushing quotations & drawing review
Request a quote
for your bushing.
Tell us what your bearing needs to do. Send a drawing or describe the part, material and quantity so we can review your requirements.
For a more useful quotation
- Drawing & dimensionsBore, outside diameter, length and critical tolerances.
- Material & quantityRequired alloy or composite structure, and order quantity.
- Working conditionsMotion, load, speed, temperature and lubrication.
Send your requirements
Send your requirements directly. Fields marked * are required.